View UPC8211TK-E2-A_936573.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NEC's SiGe LOW NOISE AMPLIFIER FOR UPC8211TK GPS/MOBILE COMMUNICATIONS
FEATURES
* LOW NOISE: NF = 1.3 dB TYP. * HIGH GAIN: GP = 18.5 dB TYP. * LOW CURRENT CONSUMPTION: ICC = 3.5 mA TYP. at VCC = 3.0 V * BUILT-IN POWER SAVE FUNCTION: * HIGH-DENSITY SURFACE MOUNTING: 6-pin lead less minimold package ( 1.5 x 1.3 x 0.55 mm)
INTERNAL BLOCK DIAGRAM
Input 1 GND 2 PS 3
DESCRIPTION
Bias
6 Vcc 5 GND 4 Output
APPLICATION
* Low Noise amplifier for GPS and mobile communications * General purpose low noise amplifier
NEC's UPC8211TK is a silicon germanium (SiGe) monolithic integrated circuit designed as low noise amplifier for GPS and as a general low nois amplifier for mobile communications. The package is 6-pin lead-less minimold (1.5 x 1.3 x 0.55 mm) suitable for surface mount and optimized for very densely populated compact designs. This IC is manufactured using NEC's 60 GHz fTUHS2 (Ultra High Speed Process) silicon bipolar process. This process can realize excellent low noise peformance and low power consumption simultaneously. NEC's stringent quality assurance and test procedures ensure the highest reliability and performance.
ELECTRICAL CHARACTERISTICS,
(Unless otherwise specified, TA = +25C, VCC = 3.0 V, fin = 1575 MHz, VPS = 3.0 V)
PART NUMBER PACKAGE OUTLINE SYMBOLS ICC GP NF IIP3 RLIN RLOUT ISO VPS ON VPS OFF Flat Po(1 dB) Po PARAMETERS AND CONDITIONS Circuit Current (no input signal) At power save mode (VPS < 0.8V) Power Gain Noise Figure 3rd Order Distortion Input Intercept Point (Gain = 18.5 dB) Input Return Loss Output Return Loss Isolation Rising Voltage from Power-Saving Mode Falling Voltage from Power-Saving Mode Gain Flatness (fin 2.5 MHz) Gain1 dB Compression Output Power Output Power UNITS mA A dB dB dBm dB dB dB V V dB dBm dBm MIN - - 15.5 - - - - - 2.2 - - - -1.5 UPC8211TK S06 TYP 3.5 - 18.5 1.3 -12 -7.5 -14.5 -32.5 - - - -4 +2.0 MAX 4.5 1 21.5 1.5 - -6 -10 - - 0.8 0.5 - -
California Eastern Laboratories
UPC8211TK ABSOLUTE MAXIMUM RATINGS1 (TA = 25C)
SYMBOLS VCC PD TA TSTG PIN PARAMETERS Supply Voltage Power Dissipation Operating Ambient Temperature Storage Temperature Input Power UNITS V mW C C dBm RATINGS 4.0 232 -40 to +85 -55 to +150 +10
RECOMMENDED OPERATING CONDITIONS
SYMBOLS VCC TA fin PARAMETERS Supply Voltage Operating Ambient Temperature Operating Frequency Range UNITS MIN V C MHz 2.7 -25 - TYP MAX 3.0 +25 1575 3.3 +85 -
Notes: 1. Mounted on a double-sided copper-clad 50 x 50 x 1.6 mm epoxy glass PWB
PIN CONNECTIONS
(Top View) (Bottom View)
6 5 4 PIN NO. 1 2 3 4 5 6 PIN NAME INPUT GND PS OUTPUT GND VCC
6G
IN
1 2 3
TEST CIRCUITS
33 pF
4.7 nH 1 1.3 pF 2 VPS 5 6
0.1 F
VCC
22 nH 750 OUT 8.2 nH 82 pF
3 0.1 F
4
Hi: ON Low: OFF (Power Save)
UPC8211TK OUTLINE DIMENSIONS (Units in mm)
PACKAGE OUTLINE S06
1.30.05
Top View
1.10.1
Bottom View
0.160.05
1.50.1
0.96
0.48
0.48
0.20.1 (0.9)
0.550.03
0.11+0.1 -0.05
ORDERING INFORMATION
PART NUMBER UPC8211TK-E2-A Note: Embossed tape, 8 mm wide. Pins 4, 5, 6 are in tape pull-out direction. QTY 5K/Reel
Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.
01/27/2005
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*)
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.

▲Up To Search▲

Price & Availability of UPC8211TK-E2-A

	To Download UPC8211TK-E2-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .